This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

JMY622 series are 13.56MHz RFID reader/writermodule with UART and IIC serial ports. The module would meet EMV2000,EMV2010 and PBOC 2.0 standards. And the module and antenna is linked by50ohm coaxial line. The impedance between RF module and antenna wastuned by impedance analyzer; so the module has excellent read/writeperformance and stability. Though the wire can reach 10m, but theperformance is good. Normally the wire should be 60cm that is themodule's best performance and stability. JMY622 adopts surface mountinstallation form. Small size is a major feature of JMY622. JMY622 hasmany kinds of funtions and it can support various contactless IC cardunder international standards. Meanwhile it can support the cards fromdifferent suppliers. Designer classified&integrated the operationcommands for contactless IC cards. In this situation, the uesr canoperate it easily via sending simple commands. The most importantfeatures for JMY622 is that it can support contactless IC cards(T=CL)fully. It can send and receive more than 256 Bytes APDU commands andalso support FSDI=8.

• Qualifications:

• • PCD: NXP SL RC400, NXP MF RC500, NXP MF RC531, NXP CL RC632

• • Working frequency: 13.56MHz

• • RF standard: ISO14443A, ISO14443B, ISO15693

• • Operating distance: 100mm(depending on card and antenna design)

• • Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order

• • Anti collision ability:Full function anti collision; be able to process multi-cardssimultaneously; be able to set operate single card only

• • Auto detecting card: Supported, default OFF; Can be set.

• • Interface: IIC, UART(selected by SPS pin, recommend to use IIC)

• • Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps

• • Max.command length: 511 Bytes

• • Interface level: 3.3V (TTL level; 5V tolerance)

• • Power supply: DC 3.3V + 5V(±0.5V)

• • Power consumption: 150mA

• • Dimension: 22mm×35mm

• • Package: Surface Mount

• • Weight: about 10g

• • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)

• • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)

• • ISP: Supported

• • RoHS: Compliant