This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

JMY608, based on NXP SL RC400, is the W/Rmodule. The module supports series IC cards according to ISO15693, andimitates the USB keyboard to read and output the card data. JMY608 isreader/writer module with USB interface (HID standard). In the systemsof Windows, Linux and other PC systems support USB keyboard, the readerimitates the USB keyboard to operate the card data. With our softwareand DIP switch, the users can set the reader if to read the number ofthe card or the data of the card or both. And the data can be positivesequence output or be reverse order output. Meanwhile the users canchoose freely the key output such as enter, tab and so on after theoutput of the number and the data of the card. The default of the JMY608is configuration mode in factory setting. If you want to let the readerwork, you need cofigurate it through the software and input theconfiguration information to the reader.

• Qualifications:

• • PCD: NXP RC400

• • Working frequency: 13.56MHz

• • RF standard: ISO15693

• • Operating distance: 100mm

• • SAM card slot: no

• • Interface: USB (HID standard)

• • Power supply: DC5V

• • Power consumption: 180mA

• • Dimension: 123mm×88mm×25mm

• • Weight: about 100g

• • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)

• • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)